Light Obscurity Linear Glass: Listral H (GL645)

This gently frosted linear glass design is popular as a glass booth partition. These glass booth partitions add just a bit more privacy and separation, yet still allow the light to flow through them @ Architectural Glass. Home designers, builders, architects and owner are welcome.

NOTE: This glass style would not be appropriate for privacy applications.

Specifications

Standard Sheet Size:   65" x 85"
Thickness:   5/32" (4mm)
Tempered Available:   Yes (4+mm only)
Ask about custom cut sizes.

 

Pricing Calculator

INSTRUCTIONS:

  1. Select your type of glass.
  2. Enter your desired dimensions:
    • Standard/Annealed glass — No minimum dimensions required. For all odd-numbered sizes and those including fractions please round up to nearest even-numbered size before entering dimensions. NOTE: Using even-numbered dimensions is standard in the glazing industry.

    • Tempered glass — 9"x9" minimum dimensions required. For all odd-numbered sizes and those including fractions please round up to nearest even-numbered size before entering dimensions. NOTE: Using even-numbered dimensions is standard in the glazing industry.
  3. Enter your desired quantity (1000 pieces maximum). NOTE: Large quantities earn greater discounts! Call us toll-free: 1-866-621-2724 for details.
  4. Click "Calculate" to determine estimated cost and total (click "Clear" if you make a mistake or wish to enter new dimensions/quantities).

Glass:  
Width (in.):     Height (in.):
Quantity:     Unit Cost: $
Total:   $  Price is for unpolished edges only. 
       

 

Glue Chip Glass

Standard annealed glass can be heat treated in a sophisticated furnace to produce tempered safety glass. The glass is first cut to size and transferred to the furnace where it is heated to a precise softening point, then quickly air cooled. The process creates a glass approximately four times stronger than standard annealed glass. When broken, tempered safety glass shatters into many small fragments thereby greatly reducing the likelihood of major injury. It is used when safety, strength and thermal resistance are important considerations.
The "basic" glasses are commonly referred to as Annealed glass. Annealing is the controlled cooling of the glass during the manufacturing process. Annealed glass can be easily cut, polished and drilled. It will break on impact into large jagged pieces.